Outstanding Diy Wall Gardens Outdoor Design Ideas That Inspire You 35
Outstanding Diy Wall Gardens Outdoor Design Ideas That Inspire You 35

30+ Outstanding Diy Wall Gardens Outdoor Design Ideas That Inspire You

Posted on

The first task is to find a suitable location. This should be away from buildings and other flammable materials and vegetation. The area should be generally flat and well drained.Next, sand or chalk should be used to make a visible impression of the pits shape on the ground enabling the pit to be excavated.

The base of the pit should be made of at least 6 inches of concrete, or better still 6 inches of compacted hardcore with a further 6 inches of concrete on top. This would require a dig of about 18 inches. This should require nothing more than a spade.Once the fire pit base is complete and the concrete has set, it will be possible to build the fire pit wall.

The wall will run around the perimeter of the fire pit and enclose it.This wall may be made of loose-laid stone or brick, or of mortar bonded masonry. If the latter is the case, then an additional mortar layer can be used to line the internal surface of the wall.

In either case the stones or bricks should be staggered for stability and appearance.Whilst this completes the main fire pit project, pavers, paving slabs, cobbles or brick sets can be used to create a clean and hard wearing surface around the fire pit.

Leave a Reply

Your email address will not be published. Required fields are marked *